Skip to content

📦 30-DAY RETURNS

🚚 FREE SHIPPING ON ALL ORDERS

Cart
0 items

Do You Need to Level Your Launch Monitor? How to Check and Fix an Uneven Setup

You can spend a lot on a launch monitor and still set it down crooked. A hitting mat that is slightly raised on one side, a garage floor with a slope, or a patch of uneven turf is enough to leave the device tilted before you swing.

So do you actually need to level your launch monitor? In most setups, yes, it is worth the few seconds. This guide explains why, how to check, and which tools make it easy.

The Short Answer

Yes, if the surface under your launch monitor is not perfectly flat, and it rarely is. Leveling takes a moment and makes your setup stable and repeatable from one session to the next. It also removes one variable when you are trying to work out why your numbers look off.

Always follow the setup instructions from your launch monitor's manufacturer first. They tell you where to place the device and how it should be positioned. Leveling is the part of that setup a stand or case can help you get right.

↑ Back to top

Why Leveling Matters

A launch monitor measures from where it sits. If the device is tilted, its measurements start from a tilted position, which is not what you want when the numbers you rely on include launch angle, ball speed, and distance.

Leveling also helps with consistency. If you set up on the same flat reference every time, a change in your numbers is more likely to come from your swing than from the setup.

↑ Back to top

What Makes a Setup Uneven

  • Hitting mats: many mats are not perfectly flat, and edges and seams can lift one side of a device.
  • Carpet: soft carpet can compress unevenly under a small base.
  • Garage floors: garage slabs are often sloped for drainage.How to protect your launch monitor in a garage golf simulator
  • Grass and turf: outdoor and artificial turf surfaces are rarely flat.
  • Moving the setup: bumping the device or shifting a mat can change the angle between sessions.

This is also why a case or stand without any leveling mechanism does not solve the problem. Surrounding a device with metal does not make the surface under it flat.

↑ Back to top

How to Check and Fix It

1. Use a level

A bubble or spirit level shows at a glance whether the device is flat. Some cases and stands have one built in, so you do not need a separate tool.

2. Adjust the feet

Adjustable feet let you raise or lower one side until the bubble sits in the middle. This works on mats, carpet, grass, and turf alike.

3. Re-check after anything moves

Look at the level at the start of each session, and again if you move the mat, shift the setup, or knock the device.

↑ Back to top

Level vs. Alignment

These are two different things, and both matter.

  • Level means the device is not tilted.
  • Alignment means the device is pointed at your target line.

A leveling stand or case helps with the first. For alignment, follow your launch monitor's setup guidance, and use an alignment rod if the manufacturer recommends one. Some stands include a holder for it.

If you want a standalone stand for practice sticks, see our golf alignment stick holder guide.

↑ Back to top

Leveling Options for Popular Launch Monitors

If your launch monitor sits in a case or on a stand, the level can come with it. Here are the SteelInkGolf options that include leveling features:

Launch monitor Product Leveling features
Foresight GCQuad / QuadMAX GCQuad / QuadMAX case Adjustable bracket and spirit level
Foresight GC3, GC3S, Bushnell Launch Pro GC3 / Launch Pro case Adjustable feet and level
SkyTrak (original) SkyTrak case Adjustable feet and level
Square Golf Square Golf case Adjustable leveling support
Garmin R10 R10 leveling stand Bubble level and adjustable feet
Rapsodo MLM2Pro, FlightScope Mevo+ MLM2Pro / Mevo+ leveling stand Adjustable feet with a bubble level, no tools required

For a closer look at each, see our guides to the GCQuad & QuadMAX, GC3, GC3S & Bushnell Launch Pro, SkyTrak, Square Golf, Garmin R10, and MLM2Pro & Mevo+.

Not sure whether you need a full case or just a stand? Read How to Choose the Right Protective Case for Your Golf Simulator Launch Monitor, or find out whether you need a case at all.

↑ Back to top

Frequently Asked Questions

Do I really need to level my launch monitor?

If the surface under it is not perfectly flat, leveling is worth doing. It keeps the device from starting out tilted and makes your setup repeatable between sessions.

How do I know if my launch monitor is level?

Use a bubble or spirit level. Some cases and stands include one, so you can check without a separate tool.

Is leveling the same as aiming at the target?

No. Leveling means the device is not tilted. Aiming, or alignment, means the device is pointed at your target line. Follow your manufacturer's setup instructions for both.

Can I level a launch monitor on a hitting mat or turf?

Yes. Adjustable feet let you level the device on mats, carpet, grass, and artificial turf, which are rarely perfectly flat.

Does a protective case level my launch monitor?

Only if it has leveling features. A case without adjustable feet or a level does not fix an uneven surface. Look for adjustable feet and a built-in level when comparing cases.

How often should I check the level?

At the start of each session, and again whenever you move the mat, shift the setup, or bump the device.

Prev post
Next post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Edit option
Have Questions?
Back In Stock Notification

Choose options

this is just a warning
Login
Shopping cart
0 items
0%