How to Level and Align Your Garmin R10
A Garmin Approach R10 needs a stable position and a clear target line to support a consistent setup. A sloped floor, a moved tripod, or a change in hitting position can make it worthwhile to check the setup again.
Choose Your Hitting Area
Choose a location with enough space for your swing and the device. Follow Garmin’s current placement instructions for your mode, ball-to-device distance, ball flight, and clearances. Keep the radar’s view unobstructed.
Place the R10 Behind the Ball
Set the R10 behind the hitting position and point its alignment line toward your intended target. Keep the device secure on its mount. Check the manufacturer’s instructions rather than assuming one setup distance works for every situation.
Check the Level
Use a level to check the setup on the surface where you will actually practice. If you use an adjustable stand, adjust its feet and check again after mounting the R10. Follow Garmin’s guidance for the relationship between the device and hitting surface.
Align and Recheck
Check that the device, ball position, and intended target are aligned. A club or alignment stick on the ground can be a visual aid; remove it from the hitting area before swinging. Recheck when the mat, ball position, or device moves.
If Readings Look Unusual
Check placement, alignment, available space, and the surface first. Consult the Garmin app and support instructions for further troubleshooting or calibration. A stand can help position the device but cannot guarantee a particular reading.
For more information, read our Garmin R10 leveling stand guide.
Frequently Asked Questions
Does the R10 need to be level?
Check the surface and follow Garmin’s current setup and calibration guidance.
Does a leveling stand replace the R10 tripod?
Check the stand’s product instructions and mounting arrangement before use.
When should I check alignment again?
Recheck after moving the device, mat, ball position, or target.





